skip to Main Content

Anti Vibration Table

Model : ASI – AVT 


It is designed to carry a load of 140 kg . The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 500 x 500 mm and has stops along its edges to prevent moulds from walking off the table during vibration . A crass arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the between a maximum of 3600 vibrations down to
2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing frequency. A switch is provided for starting the motor. Suitable for operator on 230 Volts, A.C. Single Phase, 50 Cycles.

Note: Table top size : 750 x 750 mm & 1000 x 1000 mm also available at an extra cost. Both models operates on 440 volts, A.C. Three Phase

Technical Parameter :

Penetrometer Features
Working Surface Material Granite
Overall Size(Width) 900 millimeter
Application Laboratory
Surface Material thickness 100 millimeter
Working Surface (Width) 270 millimeter
Vibration isolation type Hint: As Per IS:13301 latest Active
Natural Frequency (Hz) 5
Compatiblity Micro Balances
Levelling Repeatability NA
Surface Material Finishing NA
Working Surface (Height) 300 millimeter
High Load Capacity 50 kilogram
Overall Size(Depth) 700 millimeter
Housing Material Stainless Steel
Overall Size (Height) 500 millimeter
Water Absorption (%) 1
Features adjustable rubber shock
Weight of table 300 kilogram
Colour BLUE
Time Duration for Repairing /Replace the defect during Warranty Within one week
Warranty 1 year
Response Time to attend the complaint during Warranty 24 Hour
Standard Compliance ISO
Back To Top
×Close search